The area to be covered should be demarcated in advance. Consult an architect or a contractor while setting the floor levels.

Curbstones or any other suitable block is to be laid at the peripheral end to prated tiles from shifting or breaking at the edges.

If is essential that the sub-layer is strong enough to take on the desired load.
Laying Procedure

1. Before setting Nitco pavers, make sure a bedding of sand or stone powder of not less than 25 mm thickness is evenly spread.

2. Start laying the Pavers from one end keeping a gap of 1 to 2 mm in between pavers.

3. Once the pavers are laid, the void space in between pavers should be filled with sand or stone powder.

4. Since pavers come in different shapes and sizes, it is essential that along the periphery, the pavers are cemented or packed well to avoid shifting at the edges.

5. Now, the top surface of the floor is to be vibrated with a surface vibrator.

6. Excess sand is to be removed and the new floor is ready for use.
Note: Laying of the pavers should preferably be completed in one go. For larger areas, where laying continues for longer periods, the last row of pavers is to be protected with weak mortar, which can be dismantled the next day before starting work.